4 Ports Smart POE switch DC52V Ethernet 10/100Mbps IEEE802.3af/at for IP camera

Description

Featurs:
4 Port 100M POE Switch Specifications
The POE switch support IEEE802.3af/at POE standard, using advanced sensing algorithm, only for the terminal device which support the IEEE802.3af/at power over Ethernet standard, do not need to worry about damage to private standard POE or non-POE devices.  Automatic recognition of POE damand, speed, duplex and using the Auto Uplink cable, simple and convenient to use, no need to configure, plug and play.
The POE switch designed for commercial network, for example, some need to simplify the wireless access point (AP) and network camera installation based on IP. These away from the power socket device usually hung on the wall or the ceiling height. POE eliminates the equipment specially connected with the power socket. The connection from the AC power supply equipment more flexible, simplified wiring, flexible and extensible, get rid of affection by power line layout constraints in family and office network.
Design of high performance to price ratio, compact, flexible, EC series is the idea choice of small business network to economical use of POE deployment of wireless access point (AP) and IP camera.
Main Characteristics
* The Max distance of power supply is 300 meters.
* 6 10/100M adaptive RJ45 port, 4 port with POE function.
* Each port supports auto MDI/MDIX and auto negotiation.
* Store and forwarding, support port isolation.
* Support two lighting of uplink port.
* Support IEEE 802.3x Full-Duplex and Backpressure Half-Duplex.
* Support IEEE802.3af/at standards, can provide 15.4W/30W per port.
* Automatic detection and recognition PD device which in accordance with IEEE 802.3af/at and power supply for the device.
* Intelligent power management, if the electrical equipment power exceeds the normal power output, the system will cut off power supply of the port, after 1-2 minutes, it will reexamination and power supply.
* Low power consumption, no fan design, natural heat.
Specifications:
POE
Support IEEE 802.3 af/at (15.4W/30W)  12+ 36-
RJ45 Port
* Port number: 6
* POE port number: 4
* Port type: RJ45 adaptive
* Part rate: 10/100M
* Cable type: CAT5 or bett
Protocol standard
* IEEE 802.3 i 10 BASE-T
* IEEE 802.3 u 100 BASE-TX
* IEEE 802.3 x Flow Control
* IEEE 802.3 af/at Power over Ethernet
Performance specification
* Srore and forwarding
* Bankplane bandwidth: 1 G
* Transfer mode: Full-Duplex or Half-Duplex adaptive
* Addressing: 48 bit MAC address
* Mac Address Table: 1 K
* Network delay: 100Mbps to 100Mps, less than 20ms under 64byte frame
LED indicator
* Each Port: ACT, LINK indicator
* Each Device: Power and POE indicator
Port protection
* Meet IEC61000-4.2 (ESD) +-15KV(air),+-8KV (contactor) and can bear energy of 8/20us 24A(12A)
POE power supply parameters
* Sigle port: 15.4W/30W
* MAX Power: 65W Serials
Power supply mode
* Data line 1/2 (+), 3/6 (-); spare line 4/5 (+), 7/8 (-) optional
Power supply distance
* Maximum power distance with CAT5 UTP: 100 meters
Authentication
* CE/LVD
Electromagnetic compatibility
* Working temperature: 0~55°C
* Storage temperature: -20~70°C
* Working humidity: 10%~90%, no condensation
* Storage humidity: 5%~95%, no condensation
Input AC
100V-240V  50/60Hz
POE out
DC 52V/1.5A  100W
Packaging included:
1x 4 Ports Smart POE switch Ethernet 10/100Mbps for IP camera
Warranty Term:
Two Years Warranty
Payment:
1. We accept Paypal, other ways please contact us.
2. If you need to buy more goods, but the price is not cheap enough, or you did not find them in our store, please contact us!
3. Buyers response for all tax or VAT under any circumstances.
Shipping:
1. The item will be shipped within 1-3 business days after payment.
2. All products have been checked and packaged in good condition before dispatch.
3. We provide 12 months Warranty, if the item is defective, please notify us within 5 days of delivery. We provide replacement service for defective items.
Feedback:
1. We will do a positive feedback automatically after receiving your positive feedback. We would appreciate your positive feedback.
2. If you are not satisfied with our product or service, please E-mail me with your problem before leaving a negative/neutral feedback or open a dispute, we work hard to make sure EVERY CUSTOMER 100% SATISFIED and resolve any problem for you and always leave positive feedback to all our customers.
We care about our valued customers, and will always be willing to help you. So if you have any problems, please E-mail us immediately.
If you have any question, please contact me first before placing any bid, thanks !!!
inkfrog terapeak